DAHUA IPC-MB440S-IR connexion

Although you can find a list of tested and supported cameras at blueirissoftware.com/Technology, this is a good spot to share or inquire about what cameras have been most successful with Blue Iris for you with other users.
Post Reply
gdlmus
Posts: 4
Joined: Tue Oct 02, 2018 8:07 pm

DAHUA IPC-MB440S-IR connexion

Post by gdlmus » Tue Oct 02, 2018 8:11 pm

Hi,
I have been trying for quiet a bit to connect my DAHUA IPC-MB440S-IR to Blue Iris... No joy... :twisted:
Any advice, clue.?
Help greatly appreciated.
Thanks, regards.
-= Guy =-

jondwalters
Posts: 54
Joined: Thu Jun 21, 2018 2:49 pm

Re: DAHUA IPC-MB440S-IR connexion

Post by jondwalters » Fri Oct 05, 2018 6:09 pm

Can you post a screenshot of the camera settings in Blue iris so we can take a look?

gdlmus
Posts: 4
Joined: Tue Oct 02, 2018 8:07 pm

Re: DAHUA IPC-MB440S-IR connexion

Post by gdlmus » Mon Oct 08, 2018 7:43 pm

Hi,
Thanks for the answer.
It is not that I do not want to but it would be useless as long as I did not find the correct settings...

That camera is NOT in the Dahua list...!

Tried everiy combination of "generic" settings... NONE work

I can see that camera over the net no problem, just cannot connect it to B.I.

On two sites I have over 12 cameras... all working fine, except that :evil: camera.

Thanks, regards.

-= Guy =-

User avatar
RAW
Posts: 135
Joined: Tue May 29, 2018 1:55 pm
Location: Texas

Re: DAHUA IPC-MB440S-IR connexion

Post by RAW » Mon Oct 08, 2018 10:31 pm

Do not use the list. I have yet to import a recent Dahua where Find/Inspect didn't work perfectly.

Untitled.png
Untitled.png (5.9 KiB) Viewed 773 times

gdlmus
Posts: 4
Joined: Tue Oct 02, 2018 8:07 pm

Re: DAHUA IPC-MB440S-IR connexion

Post by gdlmus » Wed Oct 10, 2018 12:19 am

Hi RAW,

Thanks for the contrib.

I used that B.I. feature but it does NOT find anything. No camera spotted... :x

Regards.

-= Guy =-

PS: by the way: "Notify me when a reply is posted" option on this board, does NOT work... :?

User avatar
RAW
Posts: 135
Joined: Tue May 29, 2018 1:55 pm
Location: Texas

Re: DAHUA IPC-MB440S-IR connexion

Post by RAW » Wed Oct 10, 2018 4:59 am

Than there's probably something wrong with the connection or cam. I won't say I have experience with the IPC-MB440S-IR, but I do have experience with a dozen other Dahua's. Blue's discovery of all them works perfectly.

Would you paste a screenshot of what errors discovery reports?

VETACHNor
Posts: 9
Joined: Mon Oct 08, 2018 3:10 pm
Location: Maldives
Contact:

DAHUA IPC MB440S IR connexion

Post by VETACHNor » Thu Oct 11, 2018 1:27 am

With the last firmware of dahua ip Cam 09/10/2016 Dahua Node Api cant connect to the cam, i think could be by autenthication method.

ipcc for domoticz cant connect to the cam at last firmware.

With the earlier firmware can connect.

In the new firmware, dahua uses digest autenthication, Can you implementing?

Thanks

Regards

gdlmus
Posts: 4
Joined: Tue Oct 02, 2018 8:07 pm

Re: DAHUA IPC-MB440S-IR connexion

Post by gdlmus » Thu Oct 11, 2018 7:10 pm

@RAW

There is NO discovery error...

The Dahua camera is just NOT found while all others YES...

As said I can access to that camera over the Internet. It is just B.I. that does NOT recognize it... :twisted:

Post Reply